Wireless Data Server 2.1

Short Message Peer to Peer (SMPP) plug-in

This file was last modified 01.02.12

---

Thank you for choosing Wireless Data Server. This file contains installation instructions only. Please see the release notes for supported platforms, system requirements, a list of included features and a description of known problems. Please see the Wireless Data Server Administrator's Guide for information about configuring, administering and maintaining your calendar server and the Wireless Data Server User's Guide for information on using this product.

Please be aware that you must also download and install the Wireless Data Server core and the smsnotify utility, available on the Steltor web site.

---

Contents of this Readme

• How to report problems
• Installing the Short Message Peer to Peer (SMPP) plug-in
• Configuring Wireless Data Server
• Legal information

---

How to report problems

Please contact Steltor's technical support department at support@steltor.com or call (514)733-8500.

---

Installing the Short Message Peer to Peer (SMPP) plug-in

• Extract the contents of the package to your Wireless Data Server's install directory (e.g. C:\Program Files\wds).

---

Configuring Wireless Data Server

1. Open <wds>\etc\config\wds-smpp.ini file and copy all text into <wds>\etc\config\wds.ini, where <wds> is the Wireless Data Server install directory. Modify the following parameters according to your installation. For more information on these parameters, please consult the Wireless Data Server Administrator's Guide, Chapter 2.

   Table 1: Wireless Data Server configuration parameters for the SMPP plug-in

   Section	Parameter	Value
   [WDS]	smsccharset	TELEPATH-SMSC
   	smscplugin	<wds>\bin\smscsmpp.dll
   	smscconnections	A list of all section names of SMSC connections defined in this file, separated by commas and enclosed in {}
   [<SMPP1, SMPP2, etc...>]1	host	Network address of the SMSC
   	port	SMSC port number
   	systemid	ESME system ID
   	systemtype	ESME system type
   	node	Node-ID
   	msisdn	ESME MSISDN number
   	msisdnton	ESME MSISDN type of number
   	msisdnnpi	ESME MSISN numbering plan indicator
   	enquirelink	TRUE
   	enquirelink_timeinterval	2700
   	throttle_timeinterval	30
   	throttle_smsmsgburst	30

   1 For each connection to the SMSC, define a new section and set these parameters.

   
   

2. Encrypt and set the password for the ESME for each SMPP connection using the cspasswd utility:

   cspasswd -f <wds>\etc\config\wds.ini -s <SMPP1> -k passwd

   cspasswd -f <wds>\etc\config\wds.ini -s <SMPP2> -k passwd

---

Legal information

This document and the software to which it refers are Copyright © 1999-2001 Steltor Inc. (hereinafter referred to as Steltor). All rights reserved.

CorporateTime is a registered trademark of Steltor Inc. All other product names are trademarks or registered trademarks of their respective owners.

Steltor makes no expressed or implied warranty with regard to the programs and materials offered or their salability or their fitness for any particular purpose. The program, materials, and documentation are made available solely on an AS IS basis, and the entire risk as to their quality, reliability, and performance is with the user. Should the program material or documentation prove defective, the user (not Steltor, or any other party) shall bear the entire cost of all necessary correction and all incidental or consequential damages. Steltor shall not be liable for any incidental or consequential damages in connection with or arising out of the furnishing, use, or performance of the supplied material.

Copyright ©1999-2001 Steltor Inc. All rights Reserved.